Tag: Fedora Linux

Posted on

malak.ca hardware upgrade

This is a quick note (mostly to myself) to say that the computer hosting www.malak.ca — the website hosting this blog — has been switched out and replaced.

Last night, I was able to access the site normally and remotely while out to dinner at the home of some friends. This morning, in trying to ssh into the machine to do a routine manual software update, the connection kept timing out and disconnecting. Some quick diagnostics along the lines of “is the machine plugged in?” and a few reboots to watch was what happening — about as much as it would allow me to do, in fact — revealed that for reasons unknown, it was rebooting, going through a grub page, booting up, showing the Fedora logo, and, after the logo disappeared but before the login prompt appeared, a bios message came on the screen indicating a signal loss, and a reboot would begin again.

I tried a few past kernels in the grub menu, including the rescue kernel, and checking the bios, to no avail. Bringing up the text display of what was going on during the bootup was hard to access since I was scratching my head wondering “What’s the keystroke to do that again?”; same for getting the console. No matter, other things needed attending to in the moment, and I moved on.

Fortunately, my brother-in-the-know was coming within the hour, and I sent him some messages about it. He offered to bring an old junk-computer-which-wasn’t-quite-junk-yet I had given to him a while back and which he wasn’t using, at least not yet. After describing the problem to him and offering my rough diagnosis — either there was a corruption somewhere in the software, causing the reboots, or, during the reboots software commands invoke a (presumably faulty due to old age) physical hardware system or circuit, which caused a problem leading to the reboots — both of which, particularly the latter, he thought may have had merit.

My brother brought the old machine. Before installing anything, he first checked the OS SSD from the server (which also contains this blog’s database) in a USB caddy, then he checked the external data drive holding the rest of the static website and my backups, again by USB. Data on both units were in good condition. We finally went straight to replacing the machine by transferring the SSD and external drive to the new old machine, and here I am typing up this memo to myself.

The machine’s specs?

Dell Vostro 420 series; 8.0 GiB; Intel Core2 Quad Q9400 x 4; Mesa Intel G45/G43 (ELK) video card, with lots of USB ports, a networking card, and other things many people including myself take for granted.

And since the 240.1 GB SSD is the drive from the previous machine, it is still running the same instance of Fedora and the LAMP stack with WordPress, suffice it to say that I’m up to Fedora Linux 37 (Workstation Edition) 64-bit on it, and running up to date LAMP and WordPress software.

In fact, as I am finishing up this post, the machine is being updated!

Posted on

Fedora 12 installed — I’m a linux addict with an install every 6 months habit

Well over the past couple of weeks I’ve just installed Fedora 12 on three systems — mainly because I got a great great great new P4 3.0GHz home server, which I have been considering using as my desktop while using my current desktop as the server, a P4 2.8GHz.

To my dismay I have done this 6 months after I made a point of having the same version of Fedora on all my computers so as to avoid the “reformat a system every six months” treadmill that I was on by having different versions, because, well, my old server died and of course there was no point to putting a 6 month old version of Fedora on which I would only *have* to change 6 months from now, anyway … Sigh, the bliss of using CentOS, were only it not so completely obsolete, I would love to use it again … However on the other side, Fedora is the crack cocaine of “latest and greatest”, so for the moment there’s no going back!

All of this started back in, what, September, if not before; I couldn’t get the 80 gig drive and the 500 gig to play nice together, or so I thought. There *was* an issue with different spin speeds, but wait folks, there’s more. When I *did* have the 500gig as the boot disk, something seemed off with the amount of available storage, although I wasn’t fully aware. When I finally brought the 500 back as the boot drive, the installation went well several times with Fedora, then with Centos 5.1 (which would have been promptly updated upon reboot.) Except, the first reboot wouldn’t work, the system would freeze, and the keyboard buffer would fill up real quick. Forums were of little help, with sufficient dead ends and apparent red herrings. Finally, I started figuring out on my own that the BIOS was way too old to recognize such a large drive, and flashing it with a “new” bios would have required a lot of fun with WINE, which I wasn’t really wanting to get into using a live CD.

Christmas and a new server came along, and I’m up and running with a desktop upgraded from june 2008 — CentOS 5.1 to 5.2, July 2008 some version of Ubuntu, December 2008 Fedora 10, July 2009 Fedora 11, and now January 2010 Fedora 12 … and a netbook, a laptop which is no longer used, an old server, and a new server following a similar route for much of the way each. So much for even taking advantage of Fedora’s “1 month after the release of the second version following” … I’m still upgrading every 6 months!

As a result, though, I finally now have refined my “to-do” list when installing a machine so that it’s not so much of a hassle, and in fact two of the three setups were not only a breeze in and of themselves but the to-do lists also made the rest of the work a breeze, too. Of course my brother told me two years ago that his list was 300+ steps long and he’d found a two year old such list, that was only about 120+ items long. My list is currently somewhere around 58 items long depending on how you count it … I wonder how long it’ll take to get to 300? 🙂

However, I had problems with the desktop right after it was installed like a breeze, the disk boot sector died (I expected it would anyway as of about 6 months ago) and funnily enough the mem stick on which the setup worked like a breeze before suddenly wasn’t cooperating. Gotta figure out what was going wrong with UNetbootin creating the ram stick images from ISO, in which, curiously, the boot image required after the disk formatting in Anaconda wasn’t being properly copied or at least activated on the ram stick.

Anyway, I think I have to work on getting the most out of the system, I bet that months from now Fedora will find a way to make me upgrade again, with that lucky number associated with it and all … 🙂

Posted on

James Brown was right — I feel good!

I’m installing Fedora 10 on my desktop right now as I type.

Last week I updated months’ worth of blogs. One of the big themes that came out was my long-standing dislike for Ubuntu. Admittedly, unfounded beyond being a bit old (Red Hat) school, slow to adjust to change, and generally distrusting anything attached to big marketing and fanboyism.

The thing that did it involved the admittedly trivial differences with the tool bars under OpenOffice.org (why change them?) and the behaviour of the notes for commenting in Writer.

Hmm, my disk 2 is not good, if I have time tomorrow I’ll have to download another .iso, otherwise the computer will just be in standby for a couple of days, I have to go on a business trip tomorrow afternoon.

to be continued ..